Total parameters48checked
Live0within limits
NG48out of limits
Live %0 of 48 parameters
Setup approval
Result #2241 · CAB-1 · YFG-00NG
- Done by
- Auto (HMI / PLC)
- When
- 30 Oct 2026, 12:164 d ago
- Parameters
- 0 OK · 48 NG of 48
Every parameter in this record
| # | Parameter | Specification | Technique | Actual | Limits (LSL – USL) | Result |
|---|---|---|---|---|---|---|
| 4 | STATION 4 | 95.00 ± 0.05MM | Manual Entry | 1 | 95 – 96 | NG |
| 9 | O-Ring | (OK/NG) | Visual | — | — | NG |
| 9 | O-Ring | (OK/NG) | Visual | — | — | NG |
| 9 | O-Ring | (OK/NG) | Visual | — | — | NG |
| 9 | O-Ring | (OK/NG) | Visual | — | — | NG |
| 9 | O-Ring | (OK/NG) | Visual | — | — | NG |
| 10 | Calibration Check | (OK/NG) | Visual | — | — | NG |
| 10 | Calibration Check | (OK/NG) | Visual | — | — | NG |
| 10 | Calibration Check | (OK/NG) | Visual | — | — | NG |
| 10 | Calibration Check | (OK/NG) | Visual | — | — | NG |
| 10 | Calibration Check | (OK/NG) | Visual | — | — | NG |
| 11 | Verification of Inner leak | (OK/NG) | Visual | — | — | NG |
| 12 | Fin Condition | Fin Straight/No lean | Visual | — | — | NG |
| 12 | Header to Fin Gap | Less Than 5MM | Visual | — | — | NG |
| 13 | Child part Traceability | Child part receiving date | Visual | — | — | NG |
| 13 | Fin Condition | Fin Straight/No lean | Visual | — | — | NG |
| 13 | Child part Traceability | Child part receiving date | Visual | — | — | NG |
| 14 | Fin Condition | Fin Straight/No lean | Visual | — | — | NG |
| 14 | Fin Condition | Fin Straight/No lean | Visual | — | — | NG |
| 14 | HDR CLAMP Condition | OK Condition | Visual | — | — | NG |
| 15 | Braze clip cleaning | No Flux & milk of Magnesia application-(White color) | Visual | — | — | NG |
| 15 | Wrap UP sensor | OK Condition | Visual | — | — | NG |
| 15 | Flatness | 1.5 mm max | Visual | — | — | NG |
| 15 | Braze clip cleaning | No Flux & milk of Magnesia application-(White color) | Visual | — | — | NG |
| 16 | Verification of NG sample ( Robtic vision) | Should show NG | Visual | — | — | NG |
| 16 | Verification of NG sample ( Robotic vision ) | Should show NG | Visual | — | — | NG |
| 17 | Verification of OK sample ( Robotic vision) | Should show OK | Visual | — | — | NG |
| 17 | Verification of OK sample ( Robtic vision) | Should show OK | Visual | — | — | NG |
| 19 | Fin Length -2 | 560±6.0 MM | Visual | — | — | NG |
| 19 | Fin Length - 2 | 585.6±6.0MM | Visual | — | — | NG |
| 19 | Fin Length - 2 | 627±7.0MM | Visual | — | — | NG |
| 20 | Fin Length - 3 | 585.6±6.0MM | Visual | — | — | NG |
| 20 | Fin Length -3 | 560±6.0 MM | Visual | — | — | NG |
| 20 | Fin Length - 3 | 627±7.0MM | Visual | — | — | NG |
| 21 | Header to Fin Gap | Less Than 5MM | Visual | — | — | NG |
| 21 | Header to Fin Gap | Less Than 5MM | Visual | — | — | NG |
| 21 | Header to Fin Gap | Less Than 5MM | Visual | — | — | NG |
| 22 | Fin Condition | Fin Straight/No lean | Visual | — | — | NG |
| 22 | Fin Condition | Fin Straight/No lean | Visual | — | — | NG |
| 22 | Fin Condition | Fin Straight/No lean | Visual | — | — | NG |
| 23 | HDR Clamp Condition | Ok Condition | Visual | — | — | NG |
| 23 | HDR CLAMP Condition | OK Condition | Visual | — | — | NG |
| 23 | HDR CLAMP Condition | OK Condition | Visual | — | — | NG |
| 24 | Wrap UP sensor | OK Condition | Visual | — | — | NG |
| 24 | Wrap UP sensor | OK Condition | Visual | — | — | NG |
| 24 | Wrap UP Sensor | Ok Condition | Visual | — | — | NG |
| 25 | Proper Brazing of CAP | Ok Condition | Visual | — | — | NG |
| 25 | Proper Brazing of CAP | Ok Condition | Visual | — | — | NG |